When you’ve selected your scanning destination, click on the Start button.
You’ll then be met with device selection window. Make sure the Epson Expression 10000XL is selected, then click OK.
Once you can see your image in the preview window, select a scanning preset from the menu on the left of the window, or click the link at the bottom of the menu to choose more specific settings.
NOTE: All the scanning presets scan at 100 DPI. To use a high DPI, you will need to use Custom Settings.
The following settings can be adjusted manually:
Resolution: 72 - 1200 DPI Colorspace: Full 8-bit color, Greyscale, and Black & White Monochrome Brightness: +/- 100 Contrast: +/- 100
NOTE: Scanning higher resolutions will take significantly more time to complete. Doubling the resolution will actually require 4x the scanning time, because you are doubling the resolution in two directions and the scanner can only feed information to the computer at a single rate.
Click the OK button when you have finished adjusting your settings.
Click the corners of the dotted rectangle around your scan preview and drag them to crop out the portions of the scanner bed you don’t need to scan. This will reduce your scanning time.
Once you’re satisfied with the crop area and settings, press the Scan button.